Led power supply unit 250W CL250-H1V24

If you can’t find a suitable charging device in our wholesale product catalog, please contact our engineers for a tailor-made solution.


Product Category: LED Power Adapter

*SAFTY CERTIFICATION. Fully Passed CE, RoHS certification.
*ULTRA SLIM DESIGN. Strip shape adapter, portable for taking to anywhere
*SUPER SILENCE. No fan inside, keep silence anytime.

MODEL: CL250-H1V24
OUTPUT Specification:
DC VOLTAGE: 24V
VOLTAGE TOLERANCE: ±5%
RATED CURRENT: 10.4A
CURRENT RANGE: 0-10.4A
RATED POWER: 250W
RIPPLE& NOISE (MAX.): 100mVp-p
POWER FACTOR(Typ.): 0.6

INPUT Specification:
VOLTAGE RANGE: AC 110~240V
FREQUENCY RANGE: 47Hz~63Hz
AC CURRENT(Typ.): 3.4A/115V, 1.7A/230V
EFFICIENCY(Typ.): 85%
COLD START CURRENT: 50A/230VAC
SETUP, RISE, HOLD UP TIME: 100ms, 50ms, 20ms
NO-LOAD CURRENT: <10mA/240VAC

FEATURES:
-100% full load burn-in test
-Universal AC input
-Small size and high efficiency
-Conform to EMC EN5502 GB9254
-Built-in EMI filter with tiny ripple
-Comply with the safety standards GB4943 IEC60950-1 EN60950-1
-Protection: short circuit/over current/over load/over temperature

PROTECTION
-OVER LOAD: hiccup 105%~150% of the rated power 300W, recovers automatically after fault condition is removed.
-OVER CURRENT: hiccup over the maximum rated current, recovers automatically after fault condition is removed.
-SHORT CIRCUIT: hiccup short circuit, recovers automatically after fault condition is removed.
-OVER TEMP: hiccup the Rectifier ≥85°C, recovers automatically after temperature fall to environment temp.

ENVIRONMENT:
-WORKING TEMP: –20°C~+60°C (no frost)
-WORKING HUMIDITY: 20%~90%RH
-STORAGE TEMP: –40°C~85°C
-STORAGE HUMIDITY: 10%~95%RH
-SAFETY STANDARDS: CE, ROHS
-WITHSTAND VOLTAGE: I/P-O/P:1.5KVAC/1min, I/P-F/G: 1.5KVAC/1min, O/P-F/G: 0.5KVAC/1min
-EMC TESTING STANDARD: EN55022:2010; EN61000-3-2:2014; EN61000-3-3:2013; EN55024:2010+A1:2015; EN61347-1:2008+A1:2011+A2:2013; EN61347-2-13:2014

REMARK:
1. The above mentioned data were measured at 220V AC input and 25°C.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

Scroll to Top
Request A Quote