
PA-10 90W Dell Power Charger 19.5V4.62A 7.4*5.0MM Tip
PA-10 90W Dell Power Charger 19.5V4.62A 7.4*5.0MM Tip is part of our laptop chargers range. We build it on our own lines in Shenzhen, as a standard model or with your label, plug type, cable length and packaging.
Specifications
| Color | Black |
|---|---|
| Input | 100–240V AC, 50/60Hz |
| Model | PA-10 |
About this model
If you do n??t know the voltage of your charger, if the merchant recommends 18.5V, you ??d better not to charge it. Although it can be charged, it can be charged in emergency situations. It will cause damage to the battery and laptop after a long time. In other words, the voltage must be accurate (not high or low), and the current can be high (but the higher the more expensive).
Look at the brand of the original laptop, how much V and A are written on the label on the back of the original charger (generally written behind OUTPUT), the connector of the charger is probably round or square, or porous, Only if you know what you have in mind will you not buy it wrong or even be fooled. For example, your original charger is 18.5V 3.5A, which means you must buy 18.5V output, as long as the current is higher than 3.5A.
Daxpoo Tech Co. Ltd is professional engaged in the development, production, sales of all kinds of power supplies and accessories high-tech . The main products are power adapters , Switching Power Supply , waterproof Power Supply and others. The factory is located in henggang street, longgang district, Shenzhen, china. The company has a complete production management system and professional testing equipment, in line with by the good faith, the strength and the product quality obtains the field the approval. The products of our company are widely used in LED lighting, power communications, instrumentation, monitoring equipment, industrial control automation and so on. “Respect for partners, carry forward the team spirit, dare to innovate and develop, people-oriented” is the business philosophy of all staff, and will follow the footsteps of customers, continuous product innovation and service improvement. We sincerely welcome customers from home and abroad to visit, negotiate, cooperate and develop with us.
How this adapter is made
Every unit goes through the same four stages in our 3,000 m² factory before it ships.

PCBA production
Boards are assembled and soldered at ESD-protected stations.

Final assembly
Board, enclosure, cable and DC tip come together on the line.

Test and 24 h burn-in
Output, ripple and protection test, then a full day under load.

Final QC and packing
Label and appearance check, then bulk or retail packing.




