
Replacement 42V 2A Power Adapter Charger M365 Connector
Replacement 42V 2A Power Adapter Charger M365 Connector is part of our wall chargers & ac adapters range. We build it on our own lines in Shenzhen, as a standard model or with your label, plug type, cable length and packaging.
Specifications
| Input | 100–240V AC, 50/60Hz |
|---|---|
| Weight | 161g |
About this model
1. When charging, first connector to the battery, then connect to AC; after full, cut off AC, then pull the battery plug. If you pull the battery plug first while charging, especially when the charging current is large (red light), it is very easy to damage the charger.
2. Please do not run out of battery power, then charger. Otherwise the battery cannot be protected or even damaged
3. long-term shallow discharge battery, about 3 months, for a deep discharge, is the so-called re-lighting, which is conducive to the activation of long-term immobile material in the deep part of the battery. Luminous means that riding the controller battery undervoltage protection action.
4. If your battery has not been used for a long time (2-3 months), please charge the battery before using it. Make sure your battery is not broken.
How this adapter is made
Every unit goes through the same four stages in our 3,000 m² factory before it ships.

PCBA production
Boards are assembled and soldered at ESD-protected stations.

Final assembly
Board, enclosure, cable and DC tip come together on the line.

Test and 24 h burn-in
Output, ripple and protection test, then a full day under load.

Final QC and packing
Label and appearance check, then bulk or retail packing.




