
Switching model LED Power Supply 12v 2a
Switching model LED Power Supply 12v 2a is part of our led & switching power supplies range. We build it on our own lines in Shenzhen, as a standard model or with your label, plug type, cable length and packaging.
Specifications
| Model | S-20-5V |
|---|---|
| Efficiency | 76% |
| Weight | 102g |
About this model
?? R1, R2, R3, Z1, C6, Q1, Z2, R4, R5, Q2, RT1, C7 constitute the surge circuit. At the moment of starting, d ue to the existence of C6 Q2 is not conducting, the current circuit composed of RT1. When the voltage on C6 is charged to the Z1 regulator, Q2 turns on. If the C8 leakage or post-stage circuit short-circuit phenomenon, the instantaneous current in the RT1 generated on the voltage drop increases, Q1 conduction makes Q2 no gate voltage does not turn on, RT1 will be burned in a very short time to Protect the post-stage circuit.
1. The testing condition for the parameter above is: 230VAC input, rated load, 25??C 70%Rh, Humidity.
??Commercial lighting, such as Flood light, Down light, Flexible strip light, Wall washer, etc;
How this adapter is made
Every unit goes through the same four stages in our 3,000 m² factory before it ships.

PCBA production
Boards are assembled and soldered at ESD-protected stations.

Final assembly
Board, enclosure, cable and DC tip come together on the line.

Test and 24 h burn-in
Output, ripple and protection test, then a full day under load.

Final QC and packing
Label and appearance check, then bulk or retail packing.




