Power Adapter Certification Guide: CE, FCC, RoHS and UKCA for Importers
Written by engineers at the Daxpoo factory, Shenzhen · · 5 min read

Certification is the part of power adapter sourcing that buyers most often get wrong, and the part that costs the most when it goes wrong: blocked shipments, marketplace delistings and recalls. This guide explains what each mark means, which markets require it and what documents you should ask your factory for before you place an order.
This is practical guidance from a manufacturer, not legal advice. Requirements change, so confirm the current rules with a test lab or compliance consultant for your market.
European Union: CE, RoHS and ecodesign
A CE mark on a power adapter is a declaration by the manufacturer or importer that the product meets all applicable EU legislation. For external power supplies that normally means:
- Low Voltage Directive (LVD): electrical safety, usually shown with test reports to the IEC 62368-1 family of standards.
- EMC Directive: limits on electromagnetic emissions and immunity.
- RoHS Directive: restrictions on lead, mercury, cadmium and other hazardous substances.
- Ecodesign rules for external power supplies: minimum average efficiency and maximum no-load power, set by Regulation (EU) 2019/1782. Our efficiency guide explains the limits.
The importer named on the label must hold the EU declaration of conformity and be able to provide the technical documentation to market surveillance authorities on request.
Laptop chargers sold in the EU are also affected by the common charger rules, which now cover laptops. We cover that change in a separate article.
United States: FCC, safety listing and DoE
- FCC Part 15: power adapters are unintentional radiators and must stay within emission limits. Most are covered by the supplier’s declaration of conformity procedure, backed by a test report.
- Safety listing: not a federal requirement for every product, but most retailers, marketplaces and insurers expect a listing from a nationally recognised testing laboratory.
- DoE Level VI: mandatory federal efficiency standard for external power supplies. Compliant adapters carry the Roman numeral VI on the label.
- California: Proposition 65 warnings may apply depending on materials.
United Kingdom: UKCA and BS 1363
Great Britain introduced the UKCA mark after Brexit. CE marking continues to be accepted for most electrical products under current UK rules, so many importers use CE with a UK importer address on the label. Wall-mounted adapters with a UK plug must use a plug that meets BS 1363, and the UK has its own ecodesign rules that mirror the EU limits.
Other markets at a glance
- Australia and New Zealand: RCM mark and registration on the national database.
- Japan: PSE mark under the Electrical Appliance and Material Safety Law.
- Korea: KC certification.
- China domestic market: CCC certification.
Documents to ask your factory for
Before the first order, ask for these documents for the exact model you are buying:
- Safety test report (IEC/EN 62368-1 or equivalent) with photos of the internal construction
- EMC test report
- FCC test report for the US
- RoHS test report
- Efficiency test report showing DoE Level VI and EU ecodesign results
- Draft declaration of conformity for you to sign as importer
- Label artwork showing rating, marks, manufacturer or importer details and the efficiency marking
Five common certification mistakes
- Report for a different model. The test report covers a 65W model, you are buying the 90W version.
- Name mismatch. The manufacturer on the report is not the factory you are buying from.
- Missing importer details. EU and UK rules require the importer’s name and address on the product or packaging.
- Old standards. Reports to withdrawn standards are not accepted by many marketplaces.
- Changed components. The factory swaps a transformer or capacitor after certification without telling you.
Who is responsible: manufacturer, importer or brand?
In the EU and UK, the party that places the product on the market carries legal responsibility. If you import adapters under your own brand, you are usually treated as the manufacturer for compliance purposes. That means you sign the declaration of conformity, keep the technical file for ten years and put your name and address on the product or packaging.
Your factory supplies the test evidence. You remain responsible for making sure it covers the product you sell. That is why the report details matter so much.
Marketplace requirements go further than the law
Amazon, large retailers and B2B marketplaces often ask for more than the legal minimum:
- Test reports issued within the last few years and to current standard versions
- Reports from accredited laboratories
- A named EU or UK responsible person
- Product photos showing the label and markings
Check your sales channel’s requirements before you finalise label artwork.
How to check a test report in five minutes
- Model number: matches the model on your purchase order, including suffixes.
- Rating: input range and output voltage, current and power match.
- Manufacturer and factory address: match your supplier.
- Standard and version: current, not withdrawn.
- Photos: internal photos match a sample you open yourself.
- Lab: the laboratory is accredited, and the report number can be verified with them.
Keeping compliance after the first order
Certification is not a one-time event. Agree with your factory that critical components (transformer, controller IC, primary capacitor, Y-capacitor, enclosure material, cable) will not change without notice and re-testing where needed. Ask for a short declaration that the shipped batch matches the certified design, and keep a golden sample from each approved version.
How we handle certification
Our standard laptop chargers, USB-C chargers and LED power supplies are built to CE, FCC and RoHS requirements, and we supply the reports with your order. For OEM projects we can arrange UL, TÜV, CB and other marks through our test lab partners. See how we test in our factory, or send your market list through the quote form.
Frequently asked questions
Is a CE mark on the label enough to import adapters into the EU?
No. The importer must be able to show the EU declaration of conformity and the technical file behind it, including safety, EMC, RoHS and ecodesign efficiency evidence for that exact model.
Do power adapters sold in the US need FCC certification?
External power supplies are unintentional radiators and must meet FCC Part 15 emission limits. Most retailers also require a safety listing from a recognised test lab and DoE Level VI efficiency.
Does the UK still accept the CE mark?
The UK currently accepts CE marking for most electrical goods alongside UKCA. Check the latest UK government guidance before you design labels, as the rules have been extended several times.





